Home > Products > PLC Programming > MITSUBISHI PLC Programming

FX-USB-AW

Mitsubishi FX series USB PLC programming interface conversion cable.

Description

Mitsubishi FX series USB PLC programming interface conversion cable.USB/RS422 interface for Mitsubishi FX3U/FX2N/FX1N/FX0/FX0S/FX1S series PLC, 2.5 meters, with communication indicator, the largest communications range is up to 2Km.


Summary:

FX-USB-AW is the programming cable in which USB interface provided both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

FX-USB-AW is applicable to the FX3U series PLC which has the MD8F radio socket of Mitsubishi, such as FX3U/FX2N/FX1N/FX0/FX0N/FX0S/FX1S, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Do choose the USB-SC09 programming cable, for A and all FX series Mitsubishi PLC (including the old products FX2/FX2C).


FX-USB-AW principle and figure structure:

FX-USB-AW programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.


Features and technological index:

● Support FX-USB-AW operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
● Support FX-USB-AW programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0     and above.

● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Support long-distance communications, the largest communications is two kilometers (9600 bps)
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Cable length: 2.5m; Color: black


System requirement

Please make sure your PC is IBM PC compatible and has the following systemrequirements before using the USB programming cable.

● Intel is compatible with 586DX4-100MHz CPU or higher

● A standard USB port (4-pin A plug)

● Operating system is Windows2000 or Windows XP

Setting of GX Developer

After completing Driver installation, the corresponding COM port for the FX-USB-AW programming cable will be displayed in the “Device Manager” of Window.

The next step is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings.

And the following steps are exactly the same as the traditional programming cables with RS232 interfaces. 

Note: DB25M plugs and MD8M plugs of the RS422 interface can not be used at the same time. 

Open the main windows form(GX Developer), choose “Online” menu then click “Transfer Setup…” and will appear “Transfer Setup” window.

Click “Serial” button of the PC side I/F, and choice the COM X interface as it in the Device Manager.

About Long Distance Communication

For FX-USB-AW,The largest communication distance is up to two kilometers(9600 bps).The user must follow the self-made plan to extend cable.

Transmission Line should be 0.22mm or more, twisted pair wire. When thedistance is over 2,000 m,RS422 repeater could be installed to extend thedistance.

Please Note: USB interface cable cannot be extended.

Due to internal resistance have been installed in FX-USB-AW and the PLC, noexternal terminal resistance is needed.


Usage:

USB device drivers should be installed before using FX-USB-AW programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.

After completing Driver installation, the corresponding COM port for the FX-USB-AW programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.


Long-distance communications:

the largest communications range between the FX-USB-AW programming cable and the PLC is up to two kilometers (9600 bps)。The user must follow the self-made plans to extend cable. Transmission Line should be 0.22mm2 or more, twisted pair wire. When the distance is over 2,000 m , RS422 repeater could be installed to extend the distance.

Please Note: USB interface cable cannot be extended.


We produce PLC, HMI programming cables for almost all brands.
Alternative, Substitutes only about 10% price as originalQuality and Reliable, Long Life, Sales Since Year 2002
Siemens PLC Programming CableUSB-PPIOMRON PLC Programming CableUSB-CP1HT-VERTER PLC HMI CablePC-TP02
USB-PPI+USB-CIF02USB-TP02
PC-PPICQM1-CIF02TP-302MC
6ES7901-3DB30-0XA0USB-XW2Z-200S-CVPC-TP03
6ES7901-3CB30-0XA0USB-XW2Z-200S-VHUSB-TP03
6ES7972-0CB20-0XA0USB-XW2Z-200S-VUSB-TP-302PC
6GK1571-0BA00-0AA0USB-CN226TP-302MC
6ES7972-0CA23-0XA0CS1W-CN226Proface HMI CableUSB- GPW-CB02
PC-TTYCS1W-CN626GPW-CB02
6ES5 734-1BD20PC-CQM1HGPW-CB03
6ES7901-1BF00-0XA0USB-CQM1HUSB GPW-CB03
6ES7901-0BF00-0AA0XW2Z-200S-CVGP-FX
6XV1440-2KH32XW2Z-200S-VHGP-FP0
USB-OPXW2Z-200S-VGP-Q
LOGO!USB-CABLECS1W-CIF31GP-DVP
6ED1057-1AA01-0BA0USB-CIF31GP-FBS
LOGO!PC-CABLEXW2Z-200S-VGP-S7-200
6ED1057-1AA00-0BA0XW2Z-200TGP-CPM1A
USB-TP-RS485XW2Z-500TGP2000-FX2N
Allen-Bradley PLC Programming Cable1747-PICXW2Z-200P-VCA3-USBCB-01
1747-UICXW2Z-200PCA3-CBLFX-01
USB-1747-CP3XW2Z-002TCA3-CBLQ-01
USB-1761-CBL-PM02NB7-FXCA3-CBLFP-01
1761-CBL-PM02NB7-OMRONGP3000-DVP
1747-CP3FANUC PLC Programming CableIC690ACC901GP300-S7200
2711-NC13IC690USB901GP3000-FBS
1784-CP10KEYENCEUSB-KVCA3-CBLSYS-01
1784-CP11FUJI PLC CableUSB-CNV3Weintek HMI CableUSB-MT500
2711-NC21USB-UG00C-TPC-MT500
1761-CBL-HM02NN-CNV3MT500-FX
1761-CBL-AP00Delta PLC Programming CableUSBACAB230MT500-S7-200
1761-CBL-AM00DVPCAB215MT500-FBS
1772-TCDOP-DVPMT500-FP0
1747-C13DOP-FX 5MMT500-CPM1A
1786-CPDOP-FXMT500-AFPX
CP3-PM02DOP-FXMT500-CP1H
1756-CP3USB-DOPMT500-DVP
2711-NC14DOP-USBMT500-S7300
2711-NC17PC-DOPMT6000-S7300
2711-NC11DOP-FP0MT8000-S7300
2711-CBL-HM00DOP-FBSUSB-MT6000i
Schneider PLC Programming CableTSXPCX1031DOP-FP0MT6000-FX
TSXPCX3030DOP-S7-200MT6000-S7200
TSXPCU1030DOP-FPXMT6000-FBS
TSX08PRGCABDVP-GPMT6000-DVP
XBT-Z968USB-DVPMT6000-FP0
XBTZ915DVPACAB2A30MT6000-AFPX
XBTZG935DVPACAB630MT6000-Q
TSXCUSB485TP04-FXMT6000-CPM1A
MITSUBISHI PLC Programming CableUSB-SC09DVPACAB530MT6000-NB
USB-SC09-FXDVPACAB515TK6070-FX
SC09LG PLC Programming CablePC-LGTK6070-S7200
SC-10PC-XGBTK6070-FBS
SC-11USB-LGTK6070-DVP
FX-USB-AWNAIS PLC Programming CableUSB-FP-XTK6070-FP0
FX-232AWC-HUSB-AFC8513TK6070-AFPX
USB-QC30R2USB-AFC8503USB-MD204
QC30R2USB-FP1PC-MD204
USB-FX232-CAB-1AFC8503MD204-S7-200
USB- AC30R2-9SSAFC8513MD204-FBS
FX-20P-CAB0USB-GT32MD204-FX
FX-20P-CABAFP5523MD204-DVP
FX-20P-CADPAFC8523MD204-FP0
FX-422CAB0AIGT8162TK6012-FX
F2-232CAB-1AIGT8192MT6056-FX
FX-232-CAB-1AIP81842Kinco HMI CableMT4000/5000-FX
FX-50DU-CAB0AIGT8152MT4000/5000-FBS
FX-40DU-CABUSB8550MT4000/5000-DVP
FX9GT-CAB0USB8551MT4000/5000-S7200
AC30R2-9SSAFP8550MT4000/5000-FP0
AC30R4-25PAFP8551MT4000/5000-AFPX
GT01-C30R4-8PAFP5523MT4000/5000-Q
GT01-C30R2-6PHitachi PLCEH-VCB02MT4000/5000-CPM1A
GT01-C30R4-25PPC-HIDICMT4000/5000-XC
USB-GT01-C30R2-6PIDEC PLC ProgrammingPC-FC4AUSB-MT4000/5000
GT01-C30R2-9SUSB-FC4AMT4000-S7300
GT10-C30R4-8PVIGOR PLC Programming CableMWPC-200MCGS HMI CableUSB-TPC
GT10-C50R4-8PMWPC25-200TPC-FX
FX2N-485-BDVB-USB-200TPC-S7200
FX2N-232-BDUSB-VIGORTPC-FBS
FX2N-422-BDEmerson PLC ProgrammingSL-B2053RASL1TPC-DVP
FX1N-485-BDUSB-SLB2053RASLTPC-FP0
FX1N-232-BDKOYO9 PLC CableUSB-Koyo PLCTPC-AFPX
FX1N-422-BDPC-SU PLCTPC-Q
FX3U-485BDHakko PLC CableV6-CPTPC-XC
FX3U-422-BDUSB-V6-CPTPC-S7300
FX3U-232BDHITECH HMI CableUSB-PWS6600TPC-CPM1A
FX3U-CNV-BDPC-PWS6600FATEK PLC CableUSB-FBS-232P0
GT09-C20USB-5PPWS6600-FXFBS-232P0-9F
FX9GT-CAB0PC-HITECHUSB-FB-232P0-150
SIMATIC HMI6XV1 440-2KH32PWS6600-S7200Provide programming software free


ShippingDHL, UPS, Fedex, TNT, EMS, Post
PaymentT/T, Western Union, Moneygram, Paypal
Minimum Order Quantity1 pcs
Technical Supportfree
Programming Softwarefree


Kollewin Technology now brings quality fx-usb-aw products from its professional factory made by its qualified workers. Our fx-usb-aw products have already been sold to different regions like Europe, North America, UK, and so on. We can provide you a competitive price, and you can check the price list with us first if necessary. Come and get some!

Hot Tags: FX-USB-AW price list, price
Related Products

Feedback

We're Here to Help

  • +8615899891553
    +8675526898905 ext 8008
    contact@kollewin.com
    11/F., Front Block, Hang Lok Building, 130 Wing Lok St., Sheung Wan, HK

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!