Home > Products > PLC Programming > MITSUBISHI PLC Programming

USB-QC30R2

USB-QC30R2 is the programming cable in which USB interface provides both the serial connection and RS232 signal conversion.

Description

Introduction
USB-QC30R2 is the programming cable in which USB interface provides both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-QC30R2 is applicable to Mitsubishi Q series PLC (Q mode)


USB-QC30R2 principle and figure structure:

USB-QC30R2 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.


Functions
● Support USB-QC30R2 programming software version: GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 'C
● Color: black


Setting of GX Developer

Please set the driver procedure according to the following steps:
1. Turning on PC power that will connect the USB programming cable and make sure the USB port working well.
2. Put the USB programming cable into USB port and Windows will detect the device and help to add new hardware and jump to new device setting. Insert the driver CD and click “next” to continue, or select the driver on the hard disk.
If Windows does not show “find new hardware”, please click “Universal Serial Main Cable controllers” in the hardware list of device manager, and choose the USB device with question mark. Click the right key of mouse and operate to update driver procedure.

If insert the driver CD,you should select the recommended item and click “Next”.

If the driver is saved on the hard disk, you should select the second item and click “Next”. You can find the driver on the “USB Drivers1” folder.


3. Windows will detect the setting information, and load the driver to install.

4. Continue to set up, copy the driver procedure files to your hard disk by Windows.

5. When Windows appears “Completing the Found New Hardware Wizard”, click “finish” to end setting up.
6. After setting up, please make sure the "Ports (COM and LPT)" of "Start Settings Control Panel system hardware Device Manager" appears "USB Serial Port(COMx)". This COMx is the COM port of the USB programming cable. From then on, as long as you insert the programming cable, the COM port will appear. You just have to choose this COM port in application software such as programming software or communication software.

How to change COM setting
1. Delete the driver procedure of all USB to UART products to discharge COM port source, and reset up USB programming cable driver procedure. The device manager will display the cable address COM3.
2. In Windows 2000/XP the COM slogan can be changed directly. Please double click COM port device that is need changing in the device manager, and the device attribute information window will appear. Choose “port setting” as the picture shows. Click "Advanced" button, and the advanced setting information window will appear. Set the COM port to the serial number you want and click "OK" button to complete.


Setting of GX Developer
After completing Driver installation, the corresponding COM port for the USB-QC30R2 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.
Open the main windows form(GX Developer), choose “Online” menu then click “Transfer Setup…” and will appear “Transfer Setup” window.
Click “Serial” button of the PC side I/F, and choice the COM X interface as it in the Device Manager.

About Long Distance Communication
USB-QC30R2 doesn’t support long distance communication.


Notes and Troubleshoot:
1. If the USB programming cable could not be detected when opening the PC, or some other outstanding issues occur, please replug it again.
2.USB to UART is plug and play USB device. When data are being transmitted, please don’t disconnect it.
3.Sometimes when Windows System failures or outstanding issues when plug or unplug the USB cable occur, please restart the computer and PLC.


We produce PLC, HMI programming cables for almost all brands.
Alternative, Substitutes only about 10% price as originalQuality and Reliable, Long Life, Sales Since Year 2002
Siemens PLC Programming CableUSB-PPIOMRON PLC Programming CableUSB-CP1HT-VERTER PLC HMI CablePC-TP02
USB-PPI+USB-CIF02USB-TP02
PC-PPICQM1-CIF02TP-302MC
6ES7901-3DB30-0XA0USB-XW2Z-200S-CVPC-TP03
6ES7901-3CB30-0XA0USB-XW2Z-200S-VHUSB-TP03
6ES7972-0CB20-0XA0USB-XW2Z-200S-VUSB-TP-302PC
6GK1571-0BA00-0AA0USB-CN226TP-302MC
6ES7972-0CA23-0XA0CS1W-CN226Proface HMI CableUSB- GPW-CB02
PC-TTYCS1W-CN626GPW-CB02
6ES5 734-1BD20PC-CQM1HGPW-CB03
6ES7901-1BF00-0XA0USB-CQM1HUSB GPW-CB03
6ES7901-0BF00-0AA0XW2Z-200S-CVGP-FX
6XV1440-2KH32XW2Z-200S-VHGP-FP0
USB-OPXW2Z-200S-VGP-Q
LOGO!USB-CABLECS1W-CIF31GP-DVP
6ED1057-1AA01-0BA0USB-CIF31GP-FBS
LOGO!PC-CABLEXW2Z-200S-VGP-S7-200
6ED1057-1AA00-0BA0XW2Z-200TGP-CPM1A
USB-TP-RS485XW2Z-500TGP2000-FX2N
Allen-Bradley PLC Programming Cable1747-PICXW2Z-200P-VCA3-USBCB-01
1747-UICXW2Z-200PCA3-CBLFX-01
USB-1747-CP3XW2Z-002TCA3-CBLQ-01
USB-1761-CBL-PM02NB7-FXCA3-CBLFP-01
1761-CBL-PM02NB7-OMRONGP3000-DVP
1747-CP3FANUC PLC Programming CableIC690ACC901GP300-S7200
2711-NC13IC690USB901GP3000-FBS
1784-CP10KEYENCEUSB-KVCA3-CBLSYS-01
1784-CP11FUJI PLC CableUSB-CNV3Weintek HMI CableUSB-MT500
2711-NC21USB-UG00C-TPC-MT500
1761-CBL-HM02NN-CNV3MT500-FX
1761-CBL-AP00Delta PLC Programming CableUSBACAB230MT500-S7-200
1761-CBL-AM00DVPCAB215MT500-FBS
1772-TCDOP-DVPMT500-FP0
1747-C13DOP-FX 5MMT500-CPM1A
1786-CPDOP-FXMT500-AFPX
CP3-PM02DOP-FXMT500-CP1H
1756-CP3USB-DOPMT500-DVP
2711-NC14DOP-USBMT500-S7300
2711-NC17PC-DOPMT6000-S7300
2711-NC11DOP-FP0MT8000-S7300
2711-CBL-HM00DOP-FBSUSB-MT6000i
Schneider PLC Programming CableTSXPCX1031DOP-FP0MT6000-FX
TSXPCX3030DOP-S7-200MT6000-S7200
TSXPCU1030DOP-FPXMT6000-FBS
TSX08PRGCABDVP-GPMT6000-DVP
XBT-Z968USB-DVPMT6000-FP0
XBTZ915DVPACAB2A30MT6000-AFPX
XBTZG935DVPACAB630MT6000-Q
TSXCUSB485TP04-FXMT6000-CPM1A
MITSUBISHI PLC Programming CableUSB-SC09DVPACAB530MT6000-NB
USB-SC09-FXDVPACAB515TK6070-FX
SC09LG PLC Programming CablePC-LGTK6070-S7200
SC-10PC-XGBTK6070-FBS
SC-11USB-LGTK6070-DVP
FX-USB-AWNAIS PLC Programming CableUSB-FP-XTK6070-FP0
FX-232AWC-HUSB-AFC8513TK6070-AFPX
USB-QC30R2USB-AFC8503USB-MD204
QC30R2USB-FP1PC-MD204
USB-FX232-CAB-1AFC8503MD204-S7-200
USB- AC30R2-9SSAFC8513MD204-FBS
FX-20P-CAB0USB-GT32MD204-FX
FX-20P-CABAFP5523MD204-DVP
FX-20P-CADPAFC8523MD204-FP0
FX-422CAB0AIGT8162TK6012-FX
F2-232CAB-1AIGT8192MT6056-FX
FX-232-CAB-1AIP81842Kinco HMI CableMT4000/5000-FX
FX-50DU-CAB0AIGT8152MT4000/5000-FBS
FX-40DU-CABUSB8550MT4000/5000-DVP
FX9GT-CAB0USB8551MT4000/5000-S7200
AC30R2-9SSAFP8550MT4000/5000-FP0
AC30R4-25PAFP8551MT4000/5000-AFPX
GT01-C30R4-8PAFP5523MT4000/5000-Q
GT01-C30R2-6PHitachi PLCEH-VCB02MT4000/5000-CPM1A
GT01-C30R4-25PPC-HIDICMT4000/5000-XC
USB-GT01-C30R2-6PIDEC PLC ProgrammingPC-FC4AUSB-MT4000/5000
GT01-C30R2-9SUSB-FC4AMT4000-S7300
GT10-C30R4-8PVIGOR PLC Programming CableMWPC-200MCGS HMI CableUSB-TPC
GT10-C50R4-8PMWPC25-200TPC-FX
FX2N-485-BDVB-USB-200TPC-S7200
FX2N-232-BDUSB-VIGORTPC-FBS
FX2N-422-BDEmerson PLC ProgrammingSL-B2053RASL1TPC-DVP
FX1N-485-BDUSB-SLB2053RASLTPC-FP0
FX1N-232-BDKOYO9 PLC CableUSB-Koyo PLCTPC-AFPX
FX1N-422-BDPC-SU PLCTPC-Q
FX3U-485BDHakko PLC CableV6-CPTPC-XC
FX3U-422-BDUSB-V6-CPTPC-S7300
FX3U-232BDHITECH HMI CableUSB-PWS6600TPC-CPM1A
FX3U-CNV-BDPC-PWS6600FATEK PLC CableUSB-FBS-232P0
GT09-C20USB-5PPWS6600-FXFBS-232P0-9F
FX9GT-CAB0PC-HITECHUSB-FB-232P0-150
SIMATIC HMI6XV1 440-2KH32PWS6600-S7200Provide programming software free


ShippingDHL, UPS, Fedex, TNT, EMS, Post
PaymentT/T, Western Union, Moneygram, Paypal
Minimum Order Quantity1 pcs
Technical Supportfree
Programming Softwarefree


Kollewin Technology now brings quality usb-qc30r2 products from its professional factory made by its qualified workers. Our usb-qc30r2 products have already been sold to different regions like Europe, North America, UK, and so on. We can provide you a competitive price, and you can check the price list with us first if necessary. Come and get some!

Hot Tags: USB-QC30R2 price list, price

Related Products

Feedback

We're Here to Help

  • +8615899891553
    +8675526898905 ext 8008
    contact@kollewin.com
    11/F., Front Block, Hang Lok Building, 130 Wing Lok St., Sheung Wan, HK

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!