Home > Products > PLC Programming > Schneider PLC Programming

TSXPCX3030

USB/RS485 interface cable for Schneider PLC programming,2.5 meters,with master/slave switch,connect the TER and AUX port of PLC,the largest communication distance of up to 2 kilometers.

Description

USB/RS485 interface cable for Schneider PLC programming,2.5 meters,with master/slave switch,connect the TER and AUX port of PLC,the largest communication distance of up to 2 kilometers.
Not made by Schneider,OEM product as the replacement.

Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose TSXPCX3030+,you can click the following website for TSXPCX3030+:

 

Introduction

TSXPCX3030 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software to communicate through simulated traditional port and PLC devices.

TSXPCX3030 is used for communication between Modicon TSX series PLC and PC with USB port.

TSXPCX3030 supports TSX Premium(57),TSX Micro(37),TSX Nano(07),TSX Naza(08) and Twido.

TSXPCX3030 programming cable contains a Master/Slave switch which is used to select different working mode instead of PLC controlling RS485.Data sending and receiving is switched automatically,so the cable can be used for multi-station and point-to-point communication.

The TER port of TSX series PLC has a DPT signal which is used to distinguish the working mode of the port.If the DPT signal is high level,then the TER port is under Uni-Telway Master mode which is a requirement for PLC programming.If DPT signal is low level,then the TER port working mode is determined by the PLC.

Product configuration


Switch M / S corresponding mode


Features and technological index:

● USB bus-powered, with current consumption of 50 mA

● baud rate: 300 bps ~ 1Mbps automatically adaptive.

● apply to the TSX Premium, Micro, Naza, Nano and Twido

● each PC only supports a TSXPCX3030 cable

● Length: 2.5 meters, colors: black


Usage:

TSXPCX3030 needs to install USB device drivers at first. And to communicate with PLC needs the latest version of the Uni-Telway or MODBUS driver. The Uni-Telway version which can support TSXPCX3030:

Win2K/XP V1.6

WinNT4/95/98/Me/DOS     do not support

The MODBUS version which can support fTSXPCX3030:

Win2K/XP V1.1

WinNT4/95/98/Me/DOS      do not support

These drivers are usually included in the programming software on CD-ROM And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.


After the installation, icons will appear on the control panel of WINDOWS as follows:

Double-click on the icon, then achieve the settings, XWAY Test, MODBUS Test communications test of the serial ports (COM slogan) which is connected with TSXPCX3030 cables. Then the programming software can be used to complete the normal communication with the PLC.


Long-distance communications:

The largest communications range between the TSXPCX3030 and PLC are up to 2 kilometers (9600 bps),when external plus terminals 120 ohm resistance on the RS485 ports (8 pin Mini DIN Male) of the cable. And a FSACC01 Isolators Box (Schneider's model: TSXPACC01) is need to install at the end of PLC. 0.5 mm2 unshielded twisted pair lines are used for Communications.

When the distance is Over 2,000m, a RS485 repeaters (model: E485GP), can be installed for extending the distance.

Please Note: USB interface cable cannot be extended.


We produce PLC, HMI programming cables for almost all brands.
Alternative, Substitutes only about 10% price as originalQuality and Reliable, Long Life, Sales Since Year 2002
Siemens PLC Programming CableUSB-PPIOMRON PLC Programming CableUSB-CP1HT-VERTER PLC HMI CablePC-TP02
USB-PPI+USB-CIF02USB-TP02
PC-PPICQM1-CIF02TP-302MC
6ES7901-3DB30-0XA0USB-XW2Z-200S-CVPC-TP03
6ES7901-3CB30-0XA0USB-XW2Z-200S-VHUSB-TP03
6ES7972-0CB20-0XA0USB-XW2Z-200S-VUSB-TP-302PC
6GK1571-0BA00-0AA0USB-CN226TP-302MC
6ES7972-0CA23-0XA0CS1W-CN226Proface HMI CableUSB- GPW-CB02
PC-TTYCS1W-CN626GPW-CB02
6ES5 734-1BD20PC-CQM1HGPW-CB03
6ES7901-1BF00-0XA0USB-CQM1HUSB GPW-CB03
6ES7901-0BF00-0AA0XW2Z-200S-CVGP-FX
6XV1440-2KH32XW2Z-200S-VHGP-FP0
USB-OPXW2Z-200S-VGP-Q
LOGO!USB-CABLECS1W-CIF31GP-DVP
6ED1057-1AA01-0BA0USB-CIF31GP-FBS
LOGO!PC-CABLEXW2Z-200S-VGP-S7-200
6ED1057-1AA00-0BA0XW2Z-200TGP-CPM1A
USB-TP-RS485XW2Z-500TGP2000-FX2N
Allen-Bradley PLC Programming Cable1747-PICXW2Z-200P-VCA3-USBCB-01
1747-UICXW2Z-200PCA3-CBLFX-01
USB-1747-CP3XW2Z-002TCA3-CBLQ-01
USB-1761-CBL-PM02NB7-FXCA3-CBLFP-01
1761-CBL-PM02NB7-OMRONGP3000-DVP
1747-CP3FANUC PLC Programming CableIC690ACC901GP300-S7200
2711-NC13IC690USB901GP3000-FBS
1784-CP10KEYENCEUSB-KVCA3-CBLSYS-01
1784-CP11FUJI PLC CableUSB-CNV3Weintek HMI CableUSB-MT500
2711-NC21USB-UG00C-TPC-MT500
1761-CBL-HM02NN-CNV3MT500-FX
1761-CBL-AP00Delta PLC Programming CableUSBACAB230MT500-S7-200
1761-CBL-AM00DVPCAB215MT500-FBS
1772-TCDOP-DVPMT500-FP0
1747-C13DOP-FX 5MMT500-CPM1A
1786-CPDOP-FXMT500-AFPX
CP3-PM02DOP-FXMT500-CP1H
1756-CP3USB-DOPMT500-DVP
2711-NC14DOP-USBMT500-S7300
2711-NC17PC-DOPMT6000-S7300
2711-NC11DOP-FP0MT8000-S7300
2711-CBL-HM00DOP-FBSUSB-MT6000i
Schneider PLC Programming CableTSXPCX1031DOP-FP0MT6000-FX
TSXPCX3030DOP-S7-200MT6000-S7200
TSXPCU1030DOP-FPXMT6000-FBS
TSX08PRGCABDVP-GPMT6000-DVP
XBT-Z968USB-DVPMT6000-FP0
XBTZ915DVPACAB2A30MT6000-AFPX
XBTZG935DVPACAB630MT6000-Q
TSXCUSB485TP04-FXMT6000-CPM1A
MITSUBISHI PLC Programming CableUSB-SC09DVPACAB530MT6000-NB
USB-SC09-FXDVPACAB515TK6070-FX
SC09LG PLC Programming CablePC-LGTK6070-S7200
SC-10PC-XGBTK6070-FBS
SC-11USB-LGTK6070-DVP
FX-USB-AWNAIS PLC Programming CableUSB-FP-XTK6070-FP0
FX-232AWC-HUSB-AFC8513TK6070-AFPX
USB-QC30R2USB-AFC8503USB-MD204
QC30R2USB-FP1PC-MD204
USB-FX232-CAB-1AFC8503MD204-S7-200
USB- AC30R2-9SSAFC8513MD204-FBS
FX-20P-CAB0USB-GT32MD204-FX
FX-20P-CABAFP5523MD204-DVP
FX-20P-CADPAFC8523MD204-FP0
FX-422CAB0AIGT8162TK6012-FX
F2-232CAB-1AIGT8192MT6056-FX
FX-232-CAB-1AIP81842Kinco HMI CableMT4000/5000-FX
FX-50DU-CAB0AIGT8152MT4000/5000-FBS
FX-40DU-CABUSB8550MT4000/5000-DVP
FX9GT-CAB0USB8551MT4000/5000-S7200
AC30R2-9SSAFP8550MT4000/5000-FP0
AC30R4-25PAFP8551MT4000/5000-AFPX
GT01-C30R4-8PAFP5523MT4000/5000-Q
GT01-C30R2-6PHitachi PLCEH-VCB02MT4000/5000-CPM1A
GT01-C30R4-25PPC-HIDICMT4000/5000-XC
USB-GT01-C30R2-6PIDEC PLC ProgrammingPC-FC4AUSB-MT4000/5000
GT01-C30R2-9SUSB-FC4AMT4000-S7300
GT10-C30R4-8PVIGOR PLC Programming CableMWPC-200MCGS HMI CableUSB-TPC
GT10-C50R4-8PMWPC25-200TPC-FX
FX2N-485-BDVB-USB-200TPC-S7200
FX2N-232-BDUSB-VIGORTPC-FBS
FX2N-422-BDEmerson PLC ProgrammingSL-B2053RASL1TPC-DVP
FX1N-485-BDUSB-SLB2053RASLTPC-FP0
FX1N-232-BDKOYO9 PLC CableUSB-Koyo PLCTPC-AFPX
FX1N-422-BDPC-SU PLCTPC-Q
FX3U-485BDHakko PLC CableV6-CPTPC-XC
FX3U-422-BDUSB-V6-CPTPC-S7300
FX3U-232BDHITECH HMI CableUSB-PWS6600TPC-CPM1A
FX3U-CNV-BDPC-PWS6600FATEK PLC CableUSB-FBS-232P0
GT09-C20USB-5PPWS6600-FXFBS-232P0-9F
FX9GT-CAB0PC-HITECHUSB-FB-232P0-150
SIMATIC HMI6XV1 440-2KH32PWS6600-S7200Provide programming software free


ShippingDHL, UPS, Fedex, TNT, EMS, Post
PaymentT/T, Western Union, Moneygram, Paypal
Minimum Order Quantity1 pcs
Technical Supportfree
Programming Softwarefree


Kollewin Technology now brings quality tsxpcx3030 products from its professional factory made by its qualified workers. Our tsxpcx3030 products have already been sold to different regions like Europe, North America, UK, and so on. We can provide you a competitive price, and you can check the price list with us first if necessary. Come and get some!

Related Products

Feedback

We're Here to Help

  • +8615899891553
    +8675526898905 ext 8008
    contact@kollewin.com
    11/F., Front Block, Hang Lok Building, 130 Wing Lok St., Sheung Wan, HK

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!