Home > Products > PLC Programming > SIEMENS PLC Programming

6ES7901-3DB30-0XA0

USB/PPI programming cable simulates USB port as traditional serial port (usually COM3), which enables existing programming software(STEP7-MicroWin) to communicate through simulated traditional port and PLC devices.

Description

USB/PPI interface,programming cable for Siemens S7-200PLC,replace 6ES7 901-3DB30-0XA0 

New OEM Siemens S7-200 USB-PPI PLC Programming cable

Introduction
USB/PPI programming cable simulates USB port as traditional serial port (usually COM3), which enables existing programming software(STEP7-MicroWin) to communicate through simulated traditional port and PLCdevices.

The working power of this cable is from USB port,not provided by the communication port of PLC.The LED of the adapter indicates the sending and receiving status of data.

USB/PPI is applied to Siemens S7-200 PLC,NOT support hot plug.For the industry scene of strong interference and easily destroying communication port,

pls choose optoelectronic isolated USB/PPI+ programming cable.


USB/PPI principle and figure structure:

PINSignalDescription
3RxD/TxD+Data signal B(RS485+)
8RxD/TxD-Data signal A(RS485-)
5GNDGND

Pin signal definition

Functions
● Support Windows2000/Windows XP
● Support STEP7 Micro/WIN V3.2 and higher
● Fully compatible with USB V1.1 and USB CDC V1.1
● Power supply by USB main line.current:about 50mA.
● Baud rate: 300bps ~ 1Mbps
● Support long distance communication up to 2000m
● Working temperature -20~+75'C
● Length 3 meters.Color:black
● One pc supports one USB programming cable only


System requirement
Please make sure your PC is IBM PC compatible and has the following system requirements before using the USB programming cable.
● Intel is compatible with 586DX4-100MHz CPU or higher
● A standard USB port (4-pin A plug)
● Operating system is Windows2000 or Windows XP


The setting of driver procedure
Please set the driver procedure according to the following steps:
1. Turning on PC power that will connect the USB programming cable and make sure the USB port working well.
2. Put the USB programming cable into USB port and Windows will detect the device and help to add new hardware and jump to new device setting.
Insert the driver CD and click “next” to continue, or select the driver on the hard disk.


If Windows does not show “find new hardware”, please click “Universal Serial bus controllers” in the hardware list of device manager, and choose the USB device with question mark. Click the right key of mouse and operate to update driver procedure.

If insert the driver CD,you should select the recommended item and click “Next”

If the driver is saved on the hard disk, you should select the second item and click “Next”. You can find the driver on the “WIN” folder.

3. Windows will detect the setting information, and load the driver to install.

4. Continue to set up, copy the driver procedure files to your hard disk by Windows.

5. When Windows appears “Completing the Found New Hardware Wizard”, click “finish” to end setting up.

6. After setting up, please make sure the "port (COM and LPT)" of "Start Settings Control Panel system hardware Device Manager" appears


"CP2101 USB to UART Bridge Controller(COMx)". This COMx is the COM message of the USB programming cable.


From then on, as long as you insert the programming cable, the COM port will appear.


You just have to choose this COM port in application software such as programming software or communication software.

The deletion of driver procedure
Deleting driver procedure is to discharge source of COM port so that other device can be used. When driver procedure has error, it should be deleted and reset up. Please delete the driver procedure as follows:
1. Unplug the USB programming cable from you PC.
2. Choose “USB Serial Converter Drivers”from "Add or Delete Programs” in operation panel, and click the “Change/Remove” button.

How to change COM setting

1. Delete the driver procedure of all USB to UART products to discharge COM port source, and reset up USB programming cable driver procedure. The device manager will display the cable address COM3.

2. In Windows 2000/XP the COM slogan can be changed directly. Please double click COM port device that is need changing in the device manager,
and the device attribute information window will appear. Choose “port setting” as the picture shows. Click "Advanced" button, and the advanced setting information window will appear. Set the COM port to the serial number you want and click "OK" button to complete.

Setting of Step 7-MicroWin

Open the main windows form(Step7-MicroWin), click “Set PG/PC Interface” of the left view and will appear PG/PC setting window.

1.Double click “PC/PPI cable(PPI) ” to open COM port and PPI port parameter setting dialog box.

2.Click “Local Connection” to set COM port parameter, choose correctly COM port in the device manager after install the driver, and set the transmission rate as 9600bps or 19200bps,which is both OK, then the USB/PPI will adapt the baud rate automatic.

About Long Distance Communication

For USB/PPI, the largest communication distance is up to 2000m at the communication speed of 9600bps.

It needs to splice 120ohm terminal resistance between 3 and 8 pin on the RS485 port(DB9 Male) to eliminate signal reflection.But requires one PFB-G for each PLC.

Notes and Troubleshoot
1. If the USB programming cable could not be detected when opening the PC, or some other outstanding issues occur, please replug it again.
2.USB to UART is plug and play USB device. When data are being transmitted,please don't disconnect it.
3. Sometimes when Windows System failures or outstanding issues when plug or unplug the USB cable occur, please restart the computer and PLC.
4. USB/PPI cable don’t support “USB” interface in the Step7-MicroWin,so you should choose “COM” port.
5. If the COM port with “*” symbol in the software,such as “*COM3”,it indicates this COM port is at fault,pls exit programming software and then replug the USB port or reinstall the USB driver.
6. It doesn’t support 187.5Kbps baud rate.

Rejection provision
This document is to provide information,and the contents will not be noticed when revising. Because of the direct or indirect loss or errors caused by revised document,will not be the responsibility of the manufacturer.

Package Includes:
OEM Siemens S7-200 USB PPI PLC Cable X 1

We produce PLC, HMI programming cables for almost all brands.
Alternative, Substitutes only about 10% price as originalQuality and Reliable, Long Life, Sales Since Year 2002
Siemens PLC Programming CableUSB-PPIOMRON PLC Programming CableUSB-CP1HT-VERTER PLC HMI CablePC-TP02
USB-PPI+USB-CIF02USB-TP02
PC-PPICQM1-CIF02TP-302MC
6ES7901-3DB30-0XA0USB-XW2Z-200S-CVPC-TP03
6ES7901-3CB30-0XA0USB-XW2Z-200S-VHUSB-TP03
6ES7972-0CB20-0XA0USB-XW2Z-200S-VUSB-TP-302PC
6GK1571-0BA00-0AA0USB-CN226TP-302MC
6ES7972-0CA23-0XA0CS1W-CN226Proface HMI CableUSB- GPW-CB02
PC-TTYCS1W-CN626GPW-CB02
6ES5 734-1BD20PC-CQM1HGPW-CB03
6ES7901-1BF00-0XA0USB-CQM1HUSB GPW-CB03
6ES7901-0BF00-0AA0XW2Z-200S-CVGP-FX
6XV1440-2KH32XW2Z-200S-VHGP-FP0
USB-OPXW2Z-200S-VGP-Q
LOGO!USB-CABLECS1W-CIF31GP-DVP
6ED1057-1AA01-0BA0USB-CIF31GP-FBS
LOGO!PC-CABLEXW2Z-200S-VGP-S7-200
6ED1057-1AA00-0BA0XW2Z-200TGP-CPM1A
USB-TP-RS485XW2Z-500TGP2000-FX2N
Allen-Bradley PLC Programming Cable1747-PICXW2Z-200P-VCA3-USBCB-01
1747-UICXW2Z-200PCA3-CBLFX-01
USB-1747-CP3XW2Z-002TCA3-CBLQ-01
USB-1761-CBL-PM02NB7-FXCA3-CBLFP-01
1761-CBL-PM02NB7-OMRONGP3000-DVP
1747-CP3FANUC PLC Programming CableIC690ACC901GP300-S7200
2711-NC13IC690USB901GP3000-FBS
1784-CP10KEYENCEUSB-KVCA3-CBLSYS-01
1784-CP11FUJI PLC CableUSB-CNV3Weintek HMI CableUSB-MT500
2711-NC21USB-UG00C-TPC-MT500
1761-CBL-HM02NN-CNV3MT500-FX
1761-CBL-AP00Delta PLC Programming CableUSBACAB230MT500-S7-200
1761-CBL-AM00DVPCAB215MT500-FBS
1772-TCDOP-DVPMT500-FP0
1747-C13DOP-FX 5MMT500-CPM1A
1786-CPDOP-FXMT500-AFPX
CP3-PM02DOP-FXMT500-CP1H
1756-CP3USB-DOPMT500-DVP
2711-NC14DOP-USBMT500-S7300
2711-NC17PC-DOPMT6000-S7300
2711-NC11DOP-FP0MT8000-S7300
2711-CBL-HM00DOP-FBSUSB-MT6000i
Schneider PLC Programming CableTSXPCX1031DOP-FP0MT6000-FX
TSXPCX3030DOP-S7-200MT6000-S7200
TSXPCU1030DOP-FPXMT6000-FBS
TSX08PRGCABDVP-GPMT6000-DVP
XBT-Z968USB-DVPMT6000-FP0
XBTZ915DVPACAB2A30MT6000-AFPX
XBTZG935DVPACAB630MT6000-Q
TSXCUSB485TP04-FXMT6000-CPM1A
MITSUBISHI PLC Programming CableUSB-SC09DVPACAB530MT6000-NB
USB-SC09-FXDVPACAB515TK6070-FX
SC09LG PLC Programming CablePC-LGTK6070-S7200
SC-10PC-XGBTK6070-FBS
SC-11USB-LGTK6070-DVP
FX-USB-AWNAIS PLC Programming CableUSB-FP-XTK6070-FP0
FX-232AWC-HUSB-AFC8513TK6070-AFPX
USB-QC30R2USB-AFC8503USB-MD204
QC30R2USB-FP1PC-MD204
USB-FX232-CAB-1AFC8503MD204-S7-200
USB- AC30R2-9SSAFC8513MD204-FBS
FX-20P-CAB0USB-GT32MD204-FX
FX-20P-CABAFP5523MD204-DVP
FX-20P-CADPAFC8523MD204-FP0
FX-422CAB0AIGT8162TK6012-FX
F2-232CAB-1AIGT8192MT6056-FX
FX-232-CAB-1AIP81842Kinco HMI CableMT4000/5000-FX
FX-50DU-CAB0AIGT8152MT4000/5000-FBS
FX-40DU-CABUSB8550MT4000/5000-DVP
FX9GT-CAB0USB8551MT4000/5000-S7200
AC30R2-9SSAFP8550MT4000/5000-FP0
AC30R4-25PAFP8551MT4000/5000-AFPX
GT01-C30R4-8PAFP5523MT4000/5000-Q
GT01-C30R2-6PHitachi PLCEH-VCB02MT4000/5000-CPM1A
GT01-C30R4-25PPC-HIDICMT4000/5000-XC
USB-GT01-C30R2-6PIDEC PLC ProgrammingPC-FC4AUSB-MT4000/5000
GT01-C30R2-9SUSB-FC4AMT4000-S7300
GT10-C30R4-8PVIGOR PLC Programming CableMWPC-200MCGS HMI CableUSB-TPC
GT10-C50R4-8PMWPC25-200TPC-FX
FX2N-485-BDVB-USB-200TPC-S7200
FX2N-232-BDUSB-VIGORTPC-FBS
FX2N-422-BDEmerson PLC ProgrammingSL-B2053RASL1TPC-DVP
FX1N-485-BDUSB-SLB2053RASLTPC-FP0
FX1N-232-BDKOYO9 PLC CableUSB-Koyo PLCTPC-AFPX
FX1N-422-BDPC-SU PLCTPC-Q
FX3U-485BDHakko PLC CableV6-CPTPC-XC
FX3U-422-BDUSB-V6-CPTPC-S7300
FX3U-232BDHITECH HMI CableUSB-PWS6600TPC-CPM1A
FX3U-CNV-BDPC-PWS6600FATEK PLC CableUSB-FBS-232P0
GT09-C20USB-5PPWS6600-FXFBS-232P0-9F
FX9GT-CAB0PC-HITECHUSB-FB-232P0-150
SIMATIC HMI6XV1 440-2KH32PWS6600-S7200Provide programming software free


ShippingDHL, UPS, Fedex, TNT, EMS, Post
PaymentT/T, Western Union, Moneygram, Paypal
Minimum Order Quantity1 pcs
Technical Supportfree
Programming Softwarefree


Kollewin Technology now brings quality 6es7901-3db30-0xa0 products from its professional factory made by its qualified workers. Our 6es7901-3db30-0xa0 products have already been sold to different regions like Europe, North America, UK, and so on. We can provide you a competitive price, and you can check the price list with us first if necessary. Come and get some!

Feedback

We're Here to Help

  • +8615899891553
    +8675526898905 ext 8008
    contact@kollewin.com
    11/F., Front Block, Hang Lok Building, 130 Wing Lok St., Sheung Wan, HK

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!