Convert cable from USB to RS232(standard DTE interface).1 meter,with communication indicator, support traditional RS232 PLC prgramming cables.
USB-CIF31 is the real USB to RS232 interface converters. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
The RS232 ports of the USB-CIF31 are standard DTE interface (DB9M-Block, the same with the computer's serial port RS232). Its signal as shown below：
USB-CIF31 do a very good simulation as a RS232 serial port, and even direct operate hardware by I/O. for the user，just like to visit the physical RS232 ports. USB-CIF31 can be used to support majority of the traditional PLC cable programming, and this point is different from similar products on the market .the appendix will show the test results of the USB-CIF31 connection with various traditional RS232 interfaces with PLC programming cable communications.
Features and technological index:
● the operating system can support of the USB-CIF31 : Windows2000/XP (WinNT4/95/98/Me/DOS does not support)
● fully compatible with USB V1.1 and norms of USB CDC V1.1
● USB bus powered, the current consumption is about 50 mA
● baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● support UART data format: data bits: 7-8, stop bit: 1, 2, check-bit: odd / even / no parity
● each PC only support a USB-CIF31
● temperature: -20 ~ +75 ℃
● Cable length: 1 m, colors: black
USB device drivers should be installed before using USB-CIF31 programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.
After completing Driver installation, the corresponding COM port for the USB-CIF31 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces..
the success test data of the USB-CIF31 connecting with the traditional PLC programming cable (Win2000/XP operating system)
Traditional cable programming
Programming software version
Mitsubishi FX series
FXGP/WIN V1.0、GPP V4.0、GX-Developer
Mitsubishi A series
GPP V4.0、GX Developer
Matsushita FP0, FP1, FP3
LOGO! Soft V4.0
STEP7 Micro/WIN V4.0
GE 90-30 series PLC
CIMPLICITY ME V5.0
Delta DVP Series PLC
A-B SLC Series
The quality is guaranteed.It's tested before shippment.Not made by Omron,OEM product as the replacement.
|Shipping||DHL, UPS, Fedex, TNT, EMS, Post|
|Payment||T/T, Western Union, Moneygram, Paypal|
|Minimum Order Quantity||1 pcs|
Kollewin Technology now brings quality usb to rs232 converter products from its professional factory made by its qualified workers. Our usb to rs232 converter products have already been sold to different regions like Europe, North America, UK, and so on. We can provide you a competitive price, and you can check the price list with us first if necessary. Come and get some!