Home > Products > S7-200 > PLC S7-200
PC/PPI Cable

PC/PPI Cable

USB/PPI programming cable simulates USB port as traditional serial port (usually COM3), which enables existing programming software(STEP7-MicroWin) to communicate through simulated traditional port and PLC devices.

Description

USB/PPI interface,programming cable for Siemens S7-200PLC,replace 6ES7 901-3DB30-0XA0
 

New OEM Siemens S7-200 USB-PPI PLC Programming cable

Introduction

USB/PPI programming cable simulates USB port as traditional serial port (usually COM3), which enables existing programming software(STEP7-MicroWin) to communicate through simulated traditional port and PLC devices.

The working power of this cable is from USB port,not provided by the communication port of PLC.The LED of the adapter indicates the sending and receiving status of data.

USB/PPI is applied to Siemens S7-200 PLC,NOT support hot plug.For the industry scene of strong interference and easily destroying communication port,pls choose optoelectronic isolated USB/PPI+ programming cable.

USB/PPI principle and figure structure:

PINSignalDescription
3RxD/TxD+Data signal B(RS485+)
8RxD/TxD-Data signal A(RS485-)
5GNDGND

Pin signal definition

Functions
● Support Windows2000/Windows XP
● Support STEP7 Micro/WIN V3.2 and higher
● Fully compatible with USB V1.1 and USB CDC V1.1
● Power supply by USB main line.current:about 50mA.
● Baud rate: 300bps ~ 1Mbps
● Support long distance communication up to 2000m
● Working temperature -20~+75'C
● Length 3 meters.Color:black
● One pc supports one USB programming cable only

System requirement

Please make sure your PC is IBM PC compatible and has the following
system requirements before using the USB programming cable.
● Intel is compatible with 586DX4-100MHz CPU or higher
● A standard USB port (4-pin A plug)
● Operating system is Windows2000 or Windows XP


The setting of driver procedure
Please set the driver procedure according to the following steps:
1. Turning on PC power that will connect the USB programming cable and make sure the USB port working well.
2. Put the USB programming cable into USB port and Windows will detect the device and help to add new hardware and jump to new device setting.
Insert the driver CD and click “next” to continue, or select the driver on the hard disk.
If Windows does not show “find new hardware”, please click “Universal Serial bus controllers” in the hardware list of device manager, and choose the USB
device with question mark. Click the right key of mouse and operate to update driver procedure.

If insert the driver CD,you should select the recommended item and click “Next”

If the driver is saved on the hard disk, you should select the second item and click “Next”. You can find the driver on the “WIN” folder.

3. Windows will detect the setting information, and load the driver to install.

4. Continue to set up, copy the driver procedure files to your hard disk by Windows.

5. When Windows appears “Completing the Found New Hardware Wizard”, click “finish” to end setting up.

6. After setting up, please make sure the "port (COM and LPT)" of "Start Settings Control Panel system hardware Device Manager" appears
"CP2101 USB to UART Bridge Controller(COMx)". This COMx is the COM message of the USB programming cable.

From then on, as long as you insert the programming cable, the COM port will appear.

You just have to choose this COM port in application software such as programming software or communication software.

The deletion of driver procedure
Deleting driver procedure is to discharge source of COM port so that other
device can be used. When driver procedure has error, it should be deleted and reset up. Please delete the driver procedure as follows:
1. Unplug the USB programming cable from you PC.
2. Choose “USB Serial Converter Drivers”from "Add or Delete Programs” in operation panel, and click the “Change/Remove” button.

How to change COM setting

1. Delete the driver procedure of all USB to UART products to discharge COM port source, and reset up USB programming cable driver procedure.

The device manager will display the cable address COM3.
2. In Windows 2000/XP the COM slogan can be changed directly. Please double click COM port device that is need changing in the device manager,
and the device attribute information window will appear. Choose “port setting” as the picture shows. Click "Advanced" button,

and the advanced setting information window will appear. Set the COM port to the serial number you want and click "OK" button to complete.

Setting of Step 7-MicroWin

Open the main windows form(Step7-MicroWin), click “Set PG/PC Interface” of the left view and will appear PG/PC setting window.

1.Double click “PC/PPI cable(PPI) ” to open COM port and PPI port parameter setting dialog box.

2.Click “Local Connection” to set COM port parameter, choose correctly COM port in the device manager after install the driver,

and set the transmission rate as 9600bps or 19200bps,which is both OK, then the USB/PPI will adapt the baud rate automatic.

About Long Distance Communication
For USB/PPI, the largest communication distance is up to 2000m at the communication speed of 9600bps.

It needs to splice 120ohm terminal resistance between 3 and 8 pin on the RS485 port(DB9 Male) to eliminate signal reflection.

But requires one PFB-G for each PLC.

Notes and Troubleshoot

1. If the USB programming cable could not be detected when opening the PC, or some other outstanding issues occur, please replug it again.
2.USB to UART is plug and play USB device. When data are being transmitted,please don’t disconnect it.
3. Sometimes when Windows System failures or outstanding issues when plug or unplug the USB cable occur, please restart the computer and PLC.
4. USB/PPI cable don’t support “USB” interface in the Step7-MicroWin,so you should choose “COM” port.
5. If the COM port with “*” symbol in the software,such as “*COM3”,it indicates this COM port is at fault,pls exit programming software and then replug the USB port or reinstall the USB driver.
6. It doesn’t support 187.5Kbps baud rate.

Rejection provision
This document is to provide information, and the contents will not be noticed when revising. Because of the direct or indirect loss or errors caused by revised document,

will not be the responsibility of the manufacturer.

Package Includes:
OEM Siemens S7-200 USB PPI PLC Cable  X   1


We produce these substitute S7-200,300,Profibus Products.
>>>>Can be produced with your brand and model number.<<<<<
Full replace, 40%-90% Cheaper Than OriginalQuality and Reliable, Long Life, Sales Since Year 2002
S7-300 Front Connector6ES7392-1AJ00-0AA020 Pin
S7-200 CPU
6ES7214-1AD23-0XB014 DI, 10 DO
6ES7392-1AM00-0AA040 Pin6ES7214-1BD23-0XB014 DI, 10 Relay
S7-300 Rack6ES7390-1AF30-0AA0530mm6ES7216-2AD23-0XB024 DI,16 DO
6ES7390-1AJ30-0AA0830mm6ES7216-2BD23-0XB024 DI,16 Relay
6ES7390-1AB60-0AA0160mmS7-200 Digital6ES7221-1BF22-0XA08 DI
6ES7390-1AE80-0AA0482mm6ES7221-1BH22-0XA016 DI
6ES7390-1BC00-0AA02000mm6ES7221-1BL22-0XA032 DI
6ES7195-1GA00-0XA0483mm6ES7222-1BF22-0XA08 DO
6ES7195-1GF30-0XA0530mm6ES7222-1HF22-0XA08 Relay
6ES7195-1GG30-0XA0620mm6ES7222-1BH22-0XA016 DO
6ES7195-1GC00-0XA02000mm6ES7222-1HH22-0XA016 Relay
S7-400 Rack6ES7492-1AL00-0AA048 Pin6ES7222-1BL22-0XA032 DO
PS3076ES7 307-1EA00-0AA024V 5A6ES7223-1BF22-0XA04 DI, 4 DO
6ES7 307-1EA01-0AA024V 5A6ES7223-1HF22-0XA04 DI,4 Relay
6ES7 307-1KA01-0AA024V 10A6ES7223-1BH22-0XA08 DI,8 DO
6ES7 307-1KA02-0AA024V 10A6ES7223-1PH22-0XA08 DI,8 Relay
PC Adapter /USB6ES7972-0CB20-0XA0USB-DP,MPI,PPI6ES7223-1BL22-0XA016 DI,16 DO
6GK1571-0BA00-0AA0USB-DP,MPI,PPI6ES7223-1PL22-0XA016 DI,16 Relay
6ES7972-0CA23-0XA0RS232-DP,MPI,PPIS7-200 Analog6ES7231-0HC22-0XA04 AI
CP5611, CP55126GK1561-1AA00PCI-DP,MPI,PPI6ES7231-0HF22-0XA08 AI
6GK15611-1AA01PCI-DP,MPI,PPI6ES7232-0HB22-0XA02 AO
6GK1551-2AA00PCMCIA6ES7232-0HD22-0XA04 AO
CP5512 Express CardExpress6ES7235-0KD22-0XA04 AI, 1 AO
Profibus Connector6ES7972-0BA12-0XA090 Degree6ES7231-7PB22-0XA02 AI RTD
6ES7972-0BB12-0XA090 Degree,PG6ES7231-7PD22-0XA04AI TC
6ES7972-0BA41-0XA035 Degree6ES7231-7PC22-0XA04AI RTD
6ES7972-0BB41-0XA035 Degree,PG6ES7231-7PH22-0XA08 AI TC
6ES7972-0BA42-0XA035 Degree6ES7231-7PF22-0XA08 AI TC
6ES7972-0BB42-0XA035 Degree,PG6ES7231-7PL22-0XA016 AI TC
6ES7972-0BA50-0XA090 Degree,Fast6ES7231-7HC22-0XA04 AI Energy
6ES7972-0BB50-0XA090 Degree,FastS7-200 Commu6ES7291-8BA20-0XA0Battery
6ES7972-0BA52-0XA090 Degree,Fast6ES7291-8GF23-0XA064K Memory
6ES7972-0BB52-0XA090 Degree,Fast6ES7290-6AA20-0XA0I/O Module Cable
6GK1500-0FC00180 Degree,Fast6ES7277-0AA22-0XA0EM277 Profibus
6GK1500-0FC10180 Degree,Fast6ES7260-1AA00-0XA0IM 260 DP
6GK1500-0EA02180 Degree,Fast6ES7261-0AA22-0XA0IM 261 RTU
KW-DP90Diagnostic 90'S7-300 Digital6ES7321-1BH02-0AA016 DI NPN
KW-DP91Isolationed 90'6ES7321-1BH50-0AA016 DI PNP
Profibus Cable6XV1830-0EH102 wire6ES7321-1FH00-0AA016 DI AC
6XV1830-3EH10TRAILING6ES7321-1BL00-0AA032 DI
Profinet6XV1840-2AH102X2, Cable6ES7322-1BF01-0AA08 DO
S7-200 Cable6ES7 901-3CB30-0XA0PC-PPI6ES7322-1BH01-0AA016 DO
6ES7 901-3DB30-0XA0USB-PPI6ES7322-1HH01-0AA016 Relay
LOGO! Cable6ED1057-1AA00-0BA0LOGO!PC-CABLE6ES7322-1BL00-0AA032 DO
6ED1057-1AA01-0BA0LOGO!USB-CABLE6ES7323-1BL00-0AA016 DI,16 DO
S5 Cable6ES5 734-1BD20PC/TTYS7-300 Analog6ES7331-1KF02-0AB08 AI 13bit
MPI Cable6ES7 901-0BF00-0AA0.MPI6ES7331-7KF02-0AB08 AI 16bit
RS232 cable6ES7 901-1BF00-0XA0RS2326ES7331-7PF01-0AB08 AI RTD
OP cable6XV1 440-2KH32OP programming6ES7331-7PF11-0AB08 AI TC
Ethernet-300KW-300-ETHETH to MPI,DP6ES7332-5HD01-0AB04 AO
Ethernet-200KW-200-ETHETH to PPI6ES7332-5HF00-0AB08 AO
Ethernet-300KW-300-ETH-AdapterETH to MPI,DP6ES7335-7HG02-0AB04 AI, 4 AO Counter
Ethernet-200KW-200-ETH-AdapterETH to PPIS7-300 Commu6ES7153-3MB00-0XB0Modbus-TCP
Wifi-300KW-300-WIFIWifi to MPI,DP6ES7153-1AA03-0XB0Profibus Remote IO
Wifi-200KW-200-WIFIWifi to PPI6ES7341-1CH02-0AE0RS485/42


ShippingDHL, UPS, Fedex, TNT, EMS, Post
PaymentT/T, Western Union, Moneygram, Paypal
Minimum Order Quantity1 pcs
Technical Supportfree
Programming Softwarefree

Kollewin Technology now brings quality pc/ppi cable products from its professional factory made by its qualified workers. Our pc/ppi cable products have already been sold to different regions like Europe, North America, UK, and so on. We can provide you a competitive price, and you can check the price list with us first if necessary. Come and get some!

Hot Tags: PC/PPI cable price list, price
Related Products

Feedback

We're Here to Help

  • +8615899891553
    +8675526898905 ext 8008
    contact@kollewin.com
    11/F., Front Block, Hang Lok Building, 130 Wing Lok St., Sheung Wan, HK

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!